|
Access
Numbers
CALL
PILOT ACCESS NUMBER: x4444
EXPRESS MESSAGING ACCESS NUMBER: x4443
CALL PILOT OUTSIDE: 1-510-259-4444
TEMPORARY PASSWORD - 11 PLUS YOUR 4 DIGIT EXT.
QUICK
TIPS
- Primary
Extension: Your mailbox number is your primary
extension (directory number or DN).
- Password:
Your default Password is 11 plus your primary extension
.
- "#":
The '#' key acts as an ENTER key. It is used to notify
the system that you have completed your entry.
- Message Limit:
There is no limit to the number of messages that may be
received by your mailbox. However, each person has been
allotted a maximum of 30 minutes of compressed voice
storage, (60 minutes for super users of voicemail),
which can be used for saving and forwarding messages.
- Mailbox full:
If you have exceeded the amount of voice storage space,
the system will prompt you that your mailbox is full and
will suggest that you delete any unneeded messages.
Also, if the limit is exceeded and you attempt to
forward a message to another user or compose a message,
the system will deny you that capability until deletions
have been made from your archives.
- Stored
Messages: Messages heard will be stored for 7 days
and unheard messages can be stored for 14 days and then
will be automatically purged.
1.
LOG ON (FROM YOUR OWN
EXTENSION)
- Lift handset or press
extension (DN) key.
- Press MESSAGE key or
dial 4444.
- Call Pilot answers with
"Call Pilot. Mailbox?".
- Press # key (the system
automatically recognizes your DN as your mailbox
number).
- Enter password (the
default is 11 plus your 4 digit extension number).
- Press # key again.
LOG
ON (FROM ANOTHER
EXTENSION)
- Lift handset or press
extension (DN) key.
- Press MESSAGE key or
dial 4444.
- Call Pilot answers with
"Call Pilot. Mailbox?".
- Enter your mailbox
number.
- Press # key.
- Enter password .
- Press # key again.
LOG
ON (FROM OFF-SITE)
with additional options
- Dial the voicemail pilot
number 1510-259-4444.
- Call Pilot greeting
answers with options as follows:
- Enter your mailbox
number, followed by a #.
- Enter password, followed
by a #.
Return
to Index
2.
LOG OFF
- While in the Call Pilot,
dial 83.
- Call Pilot will say
"Goodbye".
- Hang up. (note): You may
choose to hang up instead of logging off; however, this
may not release the voice mail ports as quickly as may
be needed and may cause blockage to other callers (busy
signal).
3.
RECORD OR CHANGE MAILBOX
GREETINGS
Three different greetings are available to you: external,
internal, and temporary:
The external greeting will be heard by all outside callers.
When giving an external greeting, make sure that you
identify yourself by your full name and company so that
callers know that they have reached the right person and
company.
The internal greeting will be heard by the internal callers.
If you want all callers to hear the same message, only
record an external greeting.
The temporary greeting is to be used in the cases of
extended absences such as vacation, medical leave, business
travel, etc. Important: When recording a temporary greeting,
make sure that you alert the callers right away to your
absence so that they do not use the # sign to skip the
greeting.
A sample greeting is:
"STOP
and listen to this message. This is (full name) with AvantGo.
During the week of (week), I will be out of town and NOT
listening to messages. During my absence, please call
(person's name and number) or leave a message and I will get
back to you when I return."
NOTE: If you do not
wish to record a greeting, simply record your name and
extension in the personal verification (see below) and
callers will hear that recording when Call Pilot answers
plus "is unavailable. Please leave a message after the
tone."
To record the external and/or internal greeting:
- Log On.
- To Record the External
Greeting, Press 821.
- To Record the Internal
Greeting, Press 822.
- To Record the Temporary
Greeting, Press 823.
- Press 5, wait for the
record tone.
- Record greeting.
- Press # to stop
recording.
To record the temporary
greeting:
- Log On.
- To Record the Temporary
Greeting, Press 823.
- Press 5, wait for the
record tone.
- Record greeting.
- Press # to stop
recording.
To set the expiry date,
press 9.
- "Expiry
month?" To set the current month by default, press
#. Otherwise, enter the month number 1-12 plus #.
- "Expiry day?"
Enter the day of the month the greeting will expire plus
#.
- "Expiry time?"
Enter the time at which the greeting will expire plus #.
To select one minute past midnight, press #. You may
enter the time in military format or the system will
prompt you for AM/PM.
- For no automatic expiry,
press ### to override the month, day, and time prompts.
Once the recording is
made, these additional options are available:
- Press 2 to hear
recording.
- Press 5 to make
additions to the recording
- Press 76 to delete plus
5 to re-record.
- Press 83 to log off.
Return
to Index
4.
PERSONAL VERIFICATION
(RECORD NAME AND EXTENSION)
When recorded, the personal
verification identifies you to other mailbox owners when you
leave messages.
- Log On.
- Press 89.
- Press 5, wait for the
record tone.
- Say your name and
extension.
- Press # to end
recording.
Once the recording is
made, these additional options are available:
- Press 2 to hear
recording.
- Press 5 to re-record
- Press 76 to delete.
- Press 83 to log off.
5.
PASSWORD CHANGE
- Log On.
- Press 84.
- When prompted, enter
current password + # key .
- Enter new password again
+ # key, again (the password must be at least 5 digits)
(The system requires you to enter your new password
twice so that it verifies that you have not mis-dialed).
- Enter new password + #
key (The system requires you to enter your old password
because it wants to verify that it is you, the mailbox
owner, that is making the change).
- Password changed.
Return
to Index
6.
PLAYING YOUR MESSAGES
- Log On
- Press 2 to Play Messages
or wait for message information to complete and message
will automatically play.
- Press # to pause during
playback, and 2 to continue.
- Press 1 to skip
backwards 5 seconds.
- Press 3 to skip forward
5 seconds.
- Press 76 to delete
message; if you wish to restore a message that you have
deleted, go back to the top of the message and press 76
again. The system will prompt you that the message has
been restored. You may only restore a message that has
been deleted before you log off.
7.
MOVING AROUND YOUR
MAILBOX
- Press 6 to go to the
Next Message
- Press 4 to go back to
the Previous Message.
- Press 86 + the Message
Number + # to GO TO a specific message.
Return
to Index
8.
COMPOSING A MESSAGE
Many people confuse
composing a message with recording a mailbox greeting. The
COMPOSE feature allows you to record a message and edit its
content before SENDING it to another mailbox user.
- Log On.
- Press 75.
- Enter mailbox number(s)
+ # (Repeat for each mailbox until you reach the end of
the list).
- Press # again after
entering all mailboxes.
- Press 5, wait for record
tone.
- Press # to stop
recording.
Once the message is
recorded, these options are available to you:
- Press 2 to hear
recording.
- Press 5 to re-record.
- Press 76 to delete.
- Press 79 to send message
to the addressed mailboxes.
- Press 83 to log off.
Return
to Index
9.
REPLY TO MESSAGES
To call the sender
of the message:
- While listening to
the message, press 9.
To send a recorded reply
to a message from another Call Pilot user:
- Press 71.
- Press 5, wait for record
tone.
- Press # to stop
recording.
- Press 79 to send reply.
To Reply to a
Distribution message, & to all users who received it:
- Press 74 to reply to
all.
- Press 72 to hear list of
users who will receive the reply.
- Press 5, wait for record
tone.
- Press # to stop
recording.
- Press 79 to send reply.
Return
to Index
10.
FORWARDING A MESSAGE
- Press 73.
- Enter mailbox
number (s) separated by #.
- Press # again
after entering all mailboxes.
- Press 5 to record
introductory comments (not a necessary step).
- Press # to stop
recording introductory comments.
- Press 79 to send
copy.
11.
TAGGING MESSAGES
- Before pressing 79
to send a message,
- Press 701 to mark
the message urgent.
- Press 704 to mark
the message private (i.e. the receiver of the message
.would not be able to forward the message on to another
mailbox user).
- Press 705 to
receive acknowledgment of the receipt of the message.
- Press 706 to post
date the message for time delivery.
Return
to Index
12.
ALTERNATIVE LOG ON
To log on to your
own mailbox after leaving a message in another user's
mailbox:
- Finish recording
the message by pressing #.
- Press 81. The Call
Pilot will respond with "Message left.
Mailbox?".
- Log on as per
usual.
13.
COMPOSING A
DISTRIBUTION LIST
- Log On.
- Press 85.
- Enter a number
from 1 to 9 (to identify the list with a number) .
- Press #.
- Press 5 to
"Compose Distribution List".
- Enter mailbox
numbers separated by #.
- Press # again to
complete the list.
- Press 2 to review
and edit the list.
- Press 76 to delete
it.
- Press 6 to find a
specific address.
Return
to Index
14.
BYPASS MAILBOX GREETING
- Press 5 or #, hear
record tone, leave message.
If listening to a
temporary greeting and the attempt is made to bypass the
greeting, the system will prompt the caller that this is a
special greeting. The caller will have the choice to hear
the entire message by pressing 2 or to press # to leave a
message immediately.
15.
HELP SERVICE
- Press * for
General Help.
- Press 7* for
Message Command Help.
- Press 8* for
Mailbox Command Help.
Return
to Index
16.
THRU DIAL SERVICE
To dial thru to
another extension in the system while in the voice mail:
- Dial 0 + extension
number + #.
- Dialed extension
will ring.
- To dial thru to
the operator, press 0 only or press 00#.
17.
EXPRESS MESSAGING
To leave a
voicemail message for a user without ringing the telephone
set:
- Lift handset or
press extension (DN) key.
- Dial 4443.
- Voicemail will
answer with "Express Messaging. To mailbox?".
- Enter the mailbox
number + #.
- Leave a message as
per usual.
Return
to Index
18.
ATTENDANT SERVICE
When an inbound
caller presses 0 to reach an operator from your mailbox,
they will automatically be transferred to main lobby
operator. If you would like to choose another extension to
be dialed when someone presses 0, you may change the
Attendant Option in your mailbox.
- Log On.
- Dial 801.
- Enter the new
Operator Assistance number + #.
- The system will
then confirm your choice.
19.
REMOTE NOTIFICATION
To be notified by the
Call Pilot that any new messages or urgent messages only
have been left in your mailbox. If you require this type of
service, please contact your system administrator.
When activating this feature, please refer to the formal
Call Pilot User's Guide for specific information on
establishing the Remote Notification schedule for your
mailbox.
Special reminder: when entering the telephone
number where you are to be notified of incoming messages, be
sure to include the 9 plus the Area Code, for outside
access when required.
Return
to Index
|